Instructions for use: connect the air pump to air stone or
filter via air pipe. Plug into 220-240 volt power point. To prolong pump
life, replace air stones regularly. Never allow pump to come in contact
with water. Air pumps have to be kept at a height higher than the
highest water level of the aquarium, to ensure that the water does not
flow back into the air pump in case of electricity failure and not
touching or abutting the aquarium to ensure that the vibration caused by
the air pumps does not disturb the aquatic fishes. Important safeguard:
disconnect all the plugs of the electrical aquarium appliances before
putting hands into the water. We recommended that air pump and other
electrical aquarium devices, should be connected to correct voltage and
power supplies with ground fault circuit interrupters. Power: 12 w
voltage: 220-240 v frequency: 50/60 hz output: 4×4 l/min pressure: 0.02
Mpa.
.jpeg)
